Hardware Development

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.As a Sr. PIT RF Communications System Payload Integration and Test Engineer, you will engage with an experienced cross-disciplinary team to design and test innovative product solutions. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team and engage third party suppliers in order to drive key aspects of product definition, execution, and optimization. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.As a member of the Payload Integration and Test team, you will be responsible for verification and validation of the entire wireless system composed of multiple wireless components. This includes testing, analyzing, and optimizing RF systems from baseband modems to RF transceivers to phased-array antennas.Responsibilities· Working within a project team and taking responsibility for a high bandwidth, low earth orbit communications satellite constellation.· Deep-dives into component and subsystem designs to document expectations, evaluate tests, remedy test failures, and provide quick feedback to improve performance.· Collaborating with diverse technical teams such as software, mechanical, modem, and compliance teams to validate expectations for system-level and network-level operations, from concept through execution.· Integrating the end-to-end RF communications system. Meeting with customers internally and externally to select components. · Defining test plans and procedures for lab and RF chamber testing, based on identified requirements for subsystems and for the overall system.· Defining test plans and procedures for on-orbit payload verification or satellite testing, based on identified requirements.· Analyzing and mitigating potential self-interference and other system interference issues.· Implementing, validating, and optimizing RF lab set-ups composed of antenna, measurement equipment, and prototype equipment. Analyzing RF link budget / line-up for test set-ups and for the deployed system.· Configuring test equipment for automated operation: satellite link emulator, spectrum analyzer, signal generator, etc.· Meeting with suppliers to select enabling lab technologies.· Interpreting test results, troubleshooting issues, performing root-cause analysis for any test failures.· Documenting test results, test coverage, and other KPI metrics. Communicating status and issues effectively with developers and managers.· Shepherding payload subsystems through test campaigns throughout the development lifecycle, from concept to implementation to integration.Export Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS· Bachelor's degree in Electrical Engineering or related discipline, or 7+ years of RF, satellite, aerospace, or related industry experience.· 7+ years of experience in RF design and/or verification with launched products. ...

Blink is at the forefront of the consumer camera based home security market, and to continue this winning streak, we are seeking a mechanical engineer to join our Hardware Team. Come help us to design the next generations of Blink products that will drive our continued growth and delight our customers. For this job you will: - Help us design consumer electronic products for the DIY home security camera market - Work closely with the Industrial Design and EE teams to create the innovative solutions which let us build cost effective, high volume devices - Interface with our partners and vendors from the early design phase to design in manufacturability and drive costs in the right directionKey job responsibilities- Design consumer electronic products, owning medium sized designs completely and working collaboratively on larger programs- Integrate custom injection molded, stamped metal and off the shelf electro-mechanical components where appropriate- Participate in and drive improving processes and methods to enhance productivity of the entire team- Identify and investigate rapid prototype and production technologies- Prototype and test solutions for product features or advanced development- Design and validate components and systems that deliver an exceptional user experience- Select materials and component technologies appropriate to program function and cost objectives- Failure analysis and mitigating solution validation- Operate as both a leader and team member in accomplishing group goalsA day in the lifeIn this role you will work closely with Product Marketing, Industrial Design and EEs to create innovative designs and solutions for cost effective, high volume devices. Collaborate with partners and vendors from the design phase to production ramp, using rapid prototyping systems to prove out concepts before working with manufacturers to tool for mass production. Show your expertise and inventiveness in mechanical systems design, combining the results with output from the electronics and SW teams. Select the right materials and components to bring your designs to life and apply your capabilities towards tackling challenges throughout the product life-cycle. About the teamThe Blink HW Dev team is responsible from concept to mass production for all hardware aspects of the devices that are sold under the Blink brand. We work closely with product marketing and program management to ensure that the final design is up to our high standards.The team is made up of talented ME's, EE's and engineering support personnel, all dedicated to getting things done right, done fast and done economically. BASIC QUALIFICATIONS- 5+ years of working in mechanical engineering or equivalent experience- Experience with prototyping and implementation ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Come work at Amazon!As a Payload Integration and Test Network Engineer, you will be responsible for the Kuiper system data-path/network verification, support the implementation and validation sign-off of various software interface requirements and modem architectures. You will be working in a collaborative environment with a multi-disciplinary team and 3rd party partners from development to productization of various Kuiper products.Responsibilities Conceptualize and execute a test campaign with specific focus on network functionality and performance. Engage with systems, hardware, and software development engineeringteams to accomplish the following in pursuit of network integration and testing: capture requirements, define use cases, work backwards from product strategy. End to end network, data and control plane testing to include ground ,satellite and customer terminals. Troubleshoot deeply: anticipate failures, collect data, analyze log files, compare models to observed behavior, root cause. Troubleshoot and root cause throughput degradation and packet losses across the system. Support and reproduce on orbit networking and data plane issues in the lab. Utilize AWS cloud resources as well as commercial-off-the-shelf test equipment: program, instrument, and automate. Draft and maintain high quality documentation for program-level feedback: test verification matrix, status tracking, test runs for record. Enhance testing efficiency by automating test execution and analysis. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylumBASIC QUALIFICATIONS- Bachelor's degree in electrical engineering, computer engineering, computer science or equivalent experience- 5+ years of Internet Protocols networking experience- 3+ years of experience with satellite and/or cellular network testing ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.As a Payload Test Engineer, you will be an integral part of the team that tests and verifies the Kuiper production payload system. You will work closely with colleagues throughout Project Kuiper’s wide-ranging, inter-disciplinary team to support both on-the-ground payload testing and in-orbit payload operations including test definition, execution, optimization and troubleshooting. You must be flexible, responsive, and able to succeed within a fast-paced and collaborative environment.As a member of the Payload Integration and Test team, you will be responsible for verification and validation of the entire RF system composed of multiple wireless components. This includes everything from hands-on RF lab work to test definition, test software development, and on-orbit RF and network payload test support. You will test, analyze, and optimize RF systems from baseband modems to RF transceivers to phased-array antennas.Responsibilities- Develop and maintain all aspects of flight-like RF testbeds on the ground, including basic RF, networking, and Linux configuration aspects- Define test plans, test procedures for in-orbit payload testing and verification, as well as developing system-level concepts of operation and RF analyses- Design and implement system-level RF and network tests, constantly striving to automate, optimize, and improve efficiency- Review and interpret test results, troubleshoot issues, perform root-cause analysis, and develop corrective actions for test failures and in-orbit anomalies- Support payload system-level integration, test, and verification, from hands-on integration in the lab to field testing and support- Support in-orbit payload operations from test-like-you-fly verification on the ground to on-going constellation payload operations- Collaborate across diverse technical teams such as flight software, cloud software, modem, and mission operations to optimize system-level RF and network operationsExport Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS- Bachelor's degree in Electrical Engineering or related discipline with 5+ years of RF, satellite, or aerospace industry experience- Strong cross-functional coordination skills- Experience with satellite RF link budgets, payload in-orbit testing, low earth orbit (LEO) satellite communication systems, and/or payload mission operations- Experience with Linux, basic networking skills, and RF lab equipment configuration- Experience with test development in Python or similar language ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.We are seeking a highly skilled and motivated Reliability Engineer to join the Hardware Reliability Engineering team within the satellite development organization. The ideal candidate will have a background in electronics manufacturing processes, hardware reliability concepts, and reliability test practices, with a focus on ensuring the functional reliability and performance of satellite hardware systems in the harsh environment of space. You will be responsible for driving the design-for-reliability best practices, conducting rigorous testing, and analyzing on-orbit data to enhance the robustness of Kuiper satellite hardware. You will play an important role across key dimensions of a product’s lifecycle: design trades, product development and release, manufacturing process qualification, supply chain reliability, environmental stress screens, and on-orbit fault and failure investigations. You will be a key member of a high-performance team responsible for delivering a reliable satellite constellation.Key job responsibilitiesReliability Analysis and Testing:- Develop and implement reliability test plans for satellite hardware components.- Perform stress screening, environmental testing, and drive failure analysis to ensure satellite hardware meets reliability and performance targets- Analyze designs and test results to identify potential failure modes and mitigations.Design and Development Support:- Collaborate with design engineers to implement design for reliability best practices.- Act as a key stakeholder in reviewing and approving designs for release.- Participate in design reviews and failure mode effects analysis (FMEA) to assess potential reliability issues.Failure Investigation and Root Cause Analysis:- Investigate manufacturing non-conformances and field hardware failures to determine root cause. Travel as needed to perform deep dives into supplier processes. - Develop and recommend corrective actions to address identified reliability issues. - Maintain detailed records of failure analysis and reliability assessments.Reliability Modeling and Simulation:- Utilize reliability modeling and simulation tools to predict hardware performance and lifespan.- Develop and maintain reliability prediction models and databases.Documentation and Reporting:- Prepare detailed reliability reports, test plans, and procedures. - Present findings and recommendations to engineering teams and management.- Ensure compliance with industry standards and regulatory requirements for satellite hardware reliability.Continuous Improvement:- Stay current with industry trends, advancements, and best practices in hardware reliability engineering.- Propose and implement process improvements to drive improvements in reliability across the program.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS- Bachelor’s or Master’s degree in Mechanical Engineering, Materials Engineering, Reliability Engineering, Electrical Engineering, or a related field.- 2+ years of experience in hardware reliability engineering, preferably with a focus on satellite systems or space applications.- Knowledge of reliability engineering principles, methods, and tools.- Knowledge with environmental testing- Knowledge of failure analysis techniques and materials characterization methods.- Familiarity with electronics (PCBs, PCBAs, electronic components) and moving mechanical assemblies.- Self starting, with excellent problem-solving skills and attention to detail.- Team-player with clear and concise written and oral communication skills. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The Role:Be part of Project Kuiper’s sub-team responsible for defining and implementing the digital chip SOCs for communications via Low Earth Orbit satellites and Amazon gateways. This is a unique opportunity to define a groundbreaking wireless solution with few legacy constraints. The team works with customer requirements and wireless system teams to define modems, high-speed interfaces, embedded processors, and DSP solutions in latest CMOS generation technologies.In this role you will:· Implement a state of the art verification environment to facilitate testing of the RTL against reference Matlab/C models· Develop detailed test plans and write tests, run regressions, collect coverage matrices and report progress to the program· Utilize the emulation platform to improve and strengthen pre-silicon verification flow· Collaborate with cross-functional teams to leverage emulation platform for end-to-end integration testing· Work with tool vendors and drive enhancements in emulation methodology· Participate in the validation of FPGAs using test benches, which can be reused for the ASIC implementation· Run formal verification of complex blocks to ensure functional correctness· Work with the design and communication systems team and participate in system level verification using test benches constructed using UVM, System C and DPI-C· Develop a highly automated environment to run regressions that can be used to make builds and maintain organization of the databaseExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS - Bachelor's degree in Electrical / Communications Engineering or Computer Science, or related field, or equivalent experience - 15+ years of experience in verification preferably in communication systems - 5+ years of experience in UVM, C, System C, and scripting - 3+ years of experience in emulation ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The Role:Be part of Project Kuiper’s sub-team responsible for defining and implementing the digital chip SOCs for communications via Low Earth Orbit satellites and Amazon gateways. This is a unique opportunity to define a groundbreaking wireless solution with few legacy constraints. The team works with customer requirements and wireless system teams to define modems, high-speed interfaces, embedded processors, and DSP solutions in latest CMOS generation technologies.In this role you will:· Implement a state of the art verification environment to facilitate testing of the RTL against reference Matlab/C models· Develop detailed test plans and write tests, run regressions, collect coverage matrices and report progress to the program· Participate in the validation of FPGAs using test benches, which can be reused for the ASIC implementation· Run formal verification of complex blocks to ensure functional correctness· Work with the design and communication systems team and participate in system level verification using test benches constructed using UVM, System C and DPI-C· Develop a highly automated environment to run regressions that can be used to make builds and maintain organization of the databaseExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS - Bachelor's degree in Electrical / Communications Engineering or Computer Science, or related field, or equivalent experience - 5+ years of experience in verification preferably in communication systems - 2+ years of experience in UVM, C, System C, and scripting ...

* Note: This job is located in Hudson, MA We are looking for a Senior Camera Systems Engineer to develop optical solutions that require significant innovation for our Amazon Dash Cart team, located in Hudson, MA. Amazon Dash Cart allows shoppers to checkout without lines — you just place the items in the cart and the cart will take care of the rest. When you’re done shopping, you leave the store through a designated dash lane. We charge the payment method in your Amazon account as you walk through the dash lane and send you a receipt. Designed and custom-built by Amazonians, our Dash Cart uses a variety of technologies including computer vision, sensor fusion, and advanced machine learning. Check it out at . Key job responsibilitiesAs a Senior Optical Camera Systems Engineer, you will engage with an experienced cross-disciplinary staff to conceive and design features for the Amazon Dash Cart. You will work closely with an internal interdisciplinary team, and outside partners to drive key aspects of product definition, execution, and test. You must be responsive, flexible, and able to succeed within an open collaborative peer environment. Key job responsibilitiesIn this role, you will:• Work with a component engineering team and product engineering team to provide rapid prototyping and characterization of optics or imaging systems• Provide support for modelling and design for prototyping and manufacturing of lightguides and lenses.• Use software tools (LightTools, Zemax etc.) to model system optics characteristics• Work with cross-functional team to draft component specification, design reviews, work with vendors to manufacture parts and validate results by specifying test parameters and methodologies• Communicate and manage overseas component manufacturing vendorsAbout the teamDiverse ExperiencesAmazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why flexible work hours and arrangements are part of our culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Inclusive Team CultureHere at Amazon, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Mentorship and Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.- Experience in developing functional specifications, design verification plans and functional test procedures- Bachelor's Degree in Electrical Engineering or a related field- Experience developing products from concept to mass production- More than 5 years experience designing and testing RF electronics- Master's degree in electrical engineering, computer engineering, or equivalent- Experience working with interdisciplinary teams to execute product design from concept to production- Experience with the project management of technical projectsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

We are looking for an experienced Senior PLM Systems Development Engineer who combines a strong development and product lifecycle/configuration management background. This person will work closely with a team of top-notch satellite hardware engineers, as well as collaborating with our development and infrastructure teams. We are building enterprise tools to serve both immediate and long-term internal customer needs, and we’re doing it from within the teams we’re serving. A background in Product Lifecycle Management (PLM), Product Data Management (PDM), Computer Aided Design (CAD), mechanical design, or manufacturing engineering will serve you well in this environment.As a Senior Systems Development Engineer you will be expected to influence the business and technology direction of the team. You will have the ability to impact the goals of not only your direct team but partner teams and stakeholders as well. You will work with internal Kuiper Engineering customers to develop requirements for the feature gaps associated with their current enterprise tools, then architect, propose, develop, deploy, and support the resulting solutions.This is a hands-on position where your daily activities will range from strategic planning to new system development to supporting the customers that depend on your services. You will deliver consistent, well-defined results in a fast-paced systems development workflow. To succeed in this role, you will deliver on-time results that delight your customers while inspiring your team to think big about their work.Key job responsibilitiesInterface with all necessary individuals in supported departments in order to accurately identify shared and unique product data needs across the organization. Balance those requirements into a comprehensive product data management strategy.Translation of complex functional and technical requirements into detailed architecture and design documentation.Assist with guiding the development of engineering and enterprise-wide PLM and CM processes and workflows.Design, implement, test, deploy and maintain high quality, highly available, innovative software solutions to transform engineering workflows.Hands-on leadership for your team; working with others on the engineering team to guide the day-to-day development activities, leading architecture decisions, participating in designs, design reviews, and implementation.Utilize knowledge of development and service delivery best practices to lead design and development efforts for a team with a timeliness, security, and scalability mindset.Research implementations that deliver the best possible experiences for customers.BASIC QUALIFICATIONS- Bachelor's degree in a STEM field.- Experience leading the design, implementation, maintenance, and administration of CAD, PDM, or PLM systems, including driving standards and procedures.- Experience developing integrations between enterprise systems such as PLM and ERP.- 4+ years experience in systems engineering, product development, or technical product management.- 3+ years of programming experience with at least one modern language such as C++, C#, Java, Python, Golang.- 3+ years of experience with web application development.- 3+ years of experience with developing against SQL databases such as SQL Server, PostgreSQL, or MySQL.- 2+ years of experience contributing to the architecture and design of new and current systems.- Highly proficient in mechanical engineering configuration management and control.- Strong experience in communicating with various types of technical teams to collect requirements, describe product features and technical designs, and translating those across different disciplines in easy to understand ways.- Strong desire to build, sense of ownership, urgency, and drive. ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Lab Engineer will be a member of the Solar Operations Production team, focusing on executing test plans for various electrical functions of the Solar Power Modules and Solar Array including PCBA testing, tooling design, creating Solar SOPs, collaborate with the Solar Leads to assist in designing more efficient processes as well as assisting Engineering with RCAs. They will be expected to lead test plan executions and improve new processes as well as perform advanced reworks.Key job responsibilities- Maintain a safe, clean and efficient lab area- Setup and execute tests and experiments- Assist in creating test cases and test plans, modifying existing test documentation as needed- Collect and deliver data; write and/or contribute to test reports- Perform verification testing of system components- Provide test feedback to teams to improve quality performance through all phases of data collection- Work with design and test engineers assisting with prototype builds- Perform maintenance and repair of test equipment and test fixturesWe are looking for an outstanding engineer who combines superb technical and analytical capabilities with a demonstrated ability to get the right things done quickly and effectively. This person will be expected to work with a team of top-notch engineers and collaborate with multiple other spacecraft design and integration teams. They should be comfortable with a high degree of autonomy and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that they will learn a lot, have fun and make a positive impact on tens of millions of people. If this sounds like the role for you, come make history with us!Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThe Lab Engineer will identify process improvements to improve build efficiency. You will work closely with multiple engineering teams on both early hardware development and setting the stage for later production hardware manufacturing processes. The successful candidate thrives in a fast paced, start-up like environment and are able to apply their technical expertise, leadership skills and commitment to quality to positively impact team metrics and organization goals. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.About the teamProject Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Come join us at Amazon! - Associate degree in Electrical Engineering or related field- Experience as an Electrical Lab or Application Engineer.- Experience with PCB debugging and testing, including microprocessors, power supplies, ADCs and sensors - Experience with schematic and layout ECAD tools - 4+ years relevant aerospace manufacturing experience- 4+ years of hands-on work experience Electro-Mechanical Assembly, Final Integration and/ or Harness Integration experience- 4+ years experience in a fast-paced production environment with Flight Hardware- 4+ years of hand on experience with precision torque, measurement and inspection devices (i.e., automated and manual torque wrenches, calipers, micrometers, profilometers, optical inspection devices, multi-meters, torque wrenches)- Ability to work effectively in a team environment- Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment - B.S. in Electrical Engineering or related field, or equivalent experience - Electrical engineering work experience in Aerospace, Consumer Electronics, Power Electronics, Robotics, Automotive, and/or Communications fields or combination thereof - Experience in development and test of satellite bus systems - Excellent written and verbal communication; ability to explain complex concepts and designs to colleagues across disciplines- Aircraft & Powerplant (A&P) certification/license- Able to read, interpret and work from engineering documentation and/ or drawings- Experience working with FOD, ESD sensitive hardware and clean room requirements- Previous military service a plusAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $73,900/year in our lowest geographic market up to $165,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit This position will remain posted until filled. Applicants should apply via our internal or external career site.

Join the team which delivers highly differentiated silicon into Blink and Ring battery powered devices. Our verification team works on state-of-the art SoCs in a vertically integrated team environment to deliver products our customers love. Our verification team is involved in early architectural and micro-architectural trade-offs to reduce time-to-revenue by shortening the DV cycle. Innovators will be delighted with our integrated verification/validation environment that is used to perform architectural modeling to post-silicon validation. The team works backwards from customer requirements to build super-low power, energy efficient designs that include the latest in AI, video processing, low power communications and CMOS fabrication technology. Key job responsibilities- Use and/or build bit accurate C models- Evaluate block and sub-systems for testability/verifiability - Write comprehensive block and system level testplans- Build assertions, traffic generators and scoreboards- Execute testplans and perform rigorous debugBASIC QUALIFICATIONS- Bachelor's degree in Electrical / Computer Engineering or related field- 6+ years experience in digital verification, preferably in image processor, SoC/Interfaces- 3+ years of experience in C/C++ and scripting (Python or TCL)- 6+ years experience in System Verilog or UVM ...

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain — and we’re looking for talented people who want to help.You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.Amazon Web Services’ Network Products Development team is looking for experienced test professionals to help build our next generation networking platforms. The right candidate will play a key role in the design and development of our next generation Ethernet switching platforms for our world class data centers.You will have previous experience testing network products. This includes reviewing designs for testability, developing manufacturing test plans, executing them, troubleshooting issues found during early prototype stages and transition to manufacturing. Compile and analyze production test data using automated data analysis techniques. You should be passionate about the role testing plays in achieving product reliability and quality. Applying skills in developing new test processes, test automation and debug is expected.Prefer that position be based in SF Bay Area but will consider Seattle and Raleigh candidates. Candidate should be able to accommodate up to 10% travel to other AWS sites and Asia.Key job responsibilities* Develop and implement detailed validation plans tailored to specific hardware designs* Collaborate with design and production teams to understand and test against product requirements* Analyze and interpret data from validation tests, offering insights and recommendations* Design and document validation processes, findings, and insights in a structured and clear manner* Component specification study and component validation* Oversee and plan the use of validation equipment to guarantee consistent results* Work cross-functionally to troubleshoot and address any hardware issues identified during validation* Second source qualification, cost down design validation and manufacturing efficiencies* Support new product introduction and Sustaining engineering* Develop and contribute in testing automation A day in the lifeOn an everyday basis as part of our team, you have the unique opportunity to understand the growing AWS network and our internal customers’ requirement on interconnect solutions. You'll work backwards to devise hardware solutions by influencing the broad industry and/or to develop software tools with sister teams to maintain a highly available network that delights AWS customers. You design and implement processes and mechanisms that both help the team to deliver business impact to the organization in a systemic way, while also helping to raise the bar on our operational excellence.Operating at the scale we do, there is no blueprint for how to do what we do, which encourages our engineers to identify and develop simple solutions to complex problems. We encourage durable solutions that look around corners while taking into consideration our customer needs from a cost, performance, and reliability perspective. We work closely with our internal partners that design, buildand operate the network to ensure that our solutions meet their needs and exceed their expectations.About the teamWithin AWS Networking the NPD (Network Product Development) organization is responsible for, designing the hardware, building the software, and owning the interconnects for the routers that power the global AWS network. Beyond product delivery we actively manage the fleet or routers in a network that grows by 70% annually. This means tracking key business and operational metrics to ensure that we operate smoothly and minimize or eliminate customer impact due to device related issues for a transparent AWS customer experience.Why AWSAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Diverse ExperiencesAmazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Mentorship and Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.BASIC QUALIFICATIONS- Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering- 5+ years experience of hardware design and validation of components, subsystems and systems- Experience performing PCB schematic and layout reviews to ensure specification compliance- Knowledge of Power and thermal design and validation- Experience performing hardware validation, including high-speed I/O, low-speed I/O, voltage regulator and evaluating results ...

Amazon Web Services (AWS) internships are full-time (40 hours/week) for 12 consecutive weeks during summer. By applying to this position, your application will be considered for all locations we hire for in the United States.In Annapurna Labs we are at the forefront of hardware co-design not just in Amazon Web Services (AWS) but across the industry. The work we do is cutting-edge and internet-scale while also being deeply important to our customers. We design and build every component of our hardware and software to come together into products that our customers use for accelerated computing through Machine Learning acceleration and FPGA acceleration. If you are interested in "building a complete product" from inception to delighted customers, Annapurna is a fantastic choice.If this sounds exciting to you - come build the future with us!Responsibilities: • Participate in logic design activities as part of Amazon's machine learning custom silicon solutions• Work with physical design teams to achieve performance and area requirements.• Develop a deep understanding of the end customer requirements, including software applications, use models, system architecture and the SoC architecture/micro-architecture of our solutions• Develop and execute design automation mechanisms and flowsMentorship & Career GrowthOur team is dedicated to supporting new team members in an environment that celebrates knowledge sharing and mentorship. Projects and tasks are assigned in a way that leverages your strengths and helps you further develop your skillset.Inclusive Team CultureHere at AWS, we embrace our differences. We are committed to furthering our culture of inclusion. We have ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences.Work/Life HarmonyOur team puts a high value on work-life harmony. It isn’t about how many hours you spend at home or at work; it’s about the flow you establish that brings energy to both parts of your life. We believe striking the right balance between your personal and professional life is critical to life-long happiness and fulfillment. We offer flexibility and encourage you to find your own balance between your work and personal lives.BASIC QUALIFICATIONS- Enrolled in a Bachelors’ degree program or higher in Electrical Engineering, Computer Engineering, or a related field with a graduation conferral date between December 2025 and September 2026- Programming experience in C/C++- Programming experience in System Verilog or Verilog ...

The Amazon Devices team designs and engineers high-profile consumer electronics, including the best-selling Kindle family of products. We have also produced groundbreaking devices like Fire tablets, Fire TV, Amazon Dash, and Amazon Echo. What will you help us create?The Role: We are a cross functional team of engineers who obsess over our customers and our devices by seeking out and finding all hardware issues during product development. The Signal Integrity team is looking for an expert in high speed validation, interface compliance testing, and embedded system debug. The Sr. SI Validation Engineer will be a member of the Signal Integrity team with responsibilities for the simulations, tests and validation of high speed digital interfaces on new products and components. This will require close cooperation with the EE design, compliance and software teams. You will work at the PCB and product systems level. In this role, you will: - Perform pre-layout and post-layout SI and PI simulations- Work with design teams to develop and execute validation plans - Tune custom hardware to optimize Signal Integrity and cross-functional performance - Work with design team to debug issues - Develop test set-ups and research new validation technologies - Develop firmware/scripts/applications to test the hardware - Provide functional verification of electrical subsystems - Report validation status - Mentor team members on Signal Integrity and Lab Validation best-practices BASIC QUALIFICATIONS- Experience in developing functional specifications, design verification plans and functional test procedures- Bachelor's degree in electrical engineering, computer engineering, or equivalent ...

The Controls Engineer creates advanced motion control systems to enable Amazon's packaging platforms to surprise and delight customers while optimizing for the internal supply chain.The primary role of the Controls Engineer is to design and program the motion control systems that power Amazon's packaging machinery and automation. This includes deep knowledge of HMI, PLC, motion control, and integration of safety/ancillary systems. The Controls Engineer works closely with the Electrical and Mechanical teams to ensure the control systems meet project objectives.Key job responsibilities- Collaborate with the project team to design the systems architecture- Design the systems architecture including the HMI, PLC, Motion, safety, and ancillary systems at the project / platform level while ensuring the technical, cost and timeline objectives are achieved- Ensure complete and scalable project documentation- Support the safety certification process- Participate in meetings to optimize for customer experience, supply chain, and sustainabilityAbout the teamThe Mechatronics and Sustainable Packaging (MSP) team develops automated solutions and sustainable packaging across Amazon's operations, focusing on customer experience and waste reduction.BASIC QUALIFICATIONS- Experience in automating, deploying, and supporting infrastructure- Experience programming with at least one modern language such as Python, Ruby, Golang, Java, C++, C#, Rust- Experience with Linux/Unix- Experience with CI/CD pipelines build processes- Bachelors Degree in Automation, Controls, or Electrical Engineering or equivalent experience- Proven experience in advanced motion control platforms (HMI, PLC, Motion, Safety) integrated design and programing- 1+ years experience with motion control software (Rockwell, Rexroth, Beckhoff, B&R, Siemens) ...

Are you inspired by invention? Is problem solving through teamwork in your DNA? Do you like the idea of seeing how your work impacts the bigger picture? Answer yes to any of these and you’ll fit right in here at Amazon Robotics. We are a smart team of doers that work passionately to apply cutting edge advances in robotics and software to solve real-world challenges that will transform our customers’ experiences in ways we can’t even image yet. We invent new improvements every day. We are Amazon Robotics and we will give you the tools and support you need to invent with us in ways that are rewarding, fulfilling and fun.Key job responsibilitiesJob Overview – As an Amazon Robotics Mechanical Engineer, you will develop innovative hardware designs for our emerging robotic systems and improve existing hardware to optimize performance and enhance customer experience. The ideal candidate has experience designing and analyzing mechanical systems, enjoys analytical problem solving and possesses practical knowledge of high volume manufacturing methods; such as, stamping, extrusion, casting, and injection molding. This position reports directly to the Mechanical Engineering Manager. The Mechanical Engineer will be responsible for:- Collaborating with an interdisciplinary team to bring product designs from concept to production- Maintaining, redesigning, and adapting holistic hardware solutions for ambiguous problems with fluid requirements- Collaborating with Operation partners and cross-functional teams to gather design requirements and feedback- Writing functional specifications, design verification plans, and functional test procedures- Exhibiting role model behaviors of thorough engineering analysis and full lifecycle ownershipA day in the lifeAmazon offers a full range of benefits that support you and eligible family members, including domestic partners and their children. Benefits can vary by location, the number of regularly scheduled hours you work, length of employment, and job status such as seasonal or temporary employment. The benefits that generally apply to regular, full-time employees include: 1. Medical, Dental, and Vision Coverage 2. Maternity and Parental Leave Options 3. Paid Time Off (PTO) 4. 401(k) Plan If you are not sure that every qualification on the list above describes you exactly, we'd still love to hear from you! At Amazon, we value people with unique backgrounds, experiences, and skillsets. If you’re passionate about this role and want to make an impact on a global scale, please apply!BASIC QUALIFICATIONS- 4+ years of working in mechanical engineering or equivalent experience- SolidWorks or similar CAD experience, understanding of best practices for part design, advanced assemblies and complex configuration management- Thorough understanding of principals, theories and concepts in mechanical engineering and ability to apply them to product design- Hands on experience crafting and evaluating proof-of-concept models and prototypes- Ability to effectively communicate concepts and write technical documents ...

Here at Amazon, we embrace our differences. We are committed to furthering our culture of diversity and inclusion of our teams within the organization.We’re working on the future. If you are seeking an iterative fast-paced environment where you can drive innovation, apply state-of-the-art technologies to solve extreme-scale real world challenges, and provide visible benefit to end-users, this is your opportunity.Come work on the Amazon Prime Air Team!Prime Air is looking for a Lab Manager to help own the Design Support Lab’s current capabilities and its growth’s strategic planning. The successful candidate will be obsessed with quality improvement, help to generate and collect data to increase operational efficiency.Responsibilities include maintaining all aspects of the Design Support Lab, supports spaces and equipment resources, including hardware and SW tools, update all lab infrastructure, equipment, and hardware configurations. Ensure availability of build, rework, and test equipment and parts. Understanding use cases, device/system troubleshooting skills down to the component level. Ability to perform various activities including prototyping, rework, soldering, harnessing. In this role you will be able to: -Administrate and oversee the daily operations and develop the content and strategy for the Lab -Manage work queues within PA and with outside suppliers -Work with multiple engineering teams -Order supplies -Attend meetings to develop actionable items -Train and mentor team members on more complex tasks -Manage calibration of test equipment -Perform PCBA troubleshooting, modification, rework -Conduct Testing, provisioning, flashing/programming -Perform Wire Harness assembly, modification, repair, and rework -Perform Prototype assembly, modification, repair, and rework -Assist in creation of Technical Documentation, Work Instructions, Lab/Test proposals and plansExport Controls LicenseThis position may require a deemed export control license for compliance with applicable laws and regulations. Placement is contingent on Amazon’s ability to apply for and obtain an export control license on your behalf.BASIC QUALIFICATIONS- BS in Computer Science or STEM, or equivalent professional experience- A minimum of 5 years industry experience in a engineering lab environment- Demonstrated leaderships skills, independent, self-initiative and pro-active approach- Experience in coordinating hardware development projects- Good knowledge of lab techniques and equipment- Experienced with engineering labs safety practices supervising others in a hardware lab environment ...

AWS Utility Computing (UC) provides product innovations — from foundational services such as Amazon’s Simple Storage Service (S3) and Amazon Elastic Compute Cloud (EC2), to consistently released new product innovations that continue to set AWS’s services and features apart in the industry. As a member of the UC organization, you’ll support the development and management of Compute, Database, Storage, Internet of Things (Iot), Platform, and Productivity Apps services in AWS, including support for customers who require specialized security solutions for customers who require specialized security solutions for their cloud services.Annapurna Labs (our organization within AWS UC) designs silicon and software that accelerates innovation. Customers choose us to create cloud solutions that solve challenges that were unimaginable a short time ago—even yesterday. Our custom chips, accelerators, and software stacks enable us to take on technical challenges that have never been seen before, and deliver results that help our customers change the world.You will work on developing at-scale software solutions to manage the manufacturing environments at board and server level test. You will work together with other engineering teams to unify testing solutions between manufacturing and data center operations groups. You will develop and maintain the test deployment and distribution systems to ensure that our manufacturing partners have access to appropriate versions of our software as soon as it's available. You will respond to new issues raised by our manufacturing partners, analyze logs and failures, and then develop and deploy solutions to those issues. You will develop documentation as well as testing and debug procedures for our manufacturing partners to follow.Key job responsibilities• Develop, validate and deploy test infrastructure mechanisms into manufacturing environments• Manage scaled fleets of custom test equipment and ensure their maintenance• Lead and develop data gathering/parsing solutions to ensure manufacturing data is stored on AWS servers in a structured way.• Support internal lab infrastructure and manufacturing unification effortsAbout the teamAbout the teamOur team is dedicated to supporting new members. We have a broad mix of experience levels and tenures, and we’re building an environment that celebrates knowledge-sharing and mentorship. Our senior members enjoy one-on-one mentoring and thorough, but kind, code reviews. We care about your career growth and strive to assign projects that help our team members develop your engineering expertise so you feel empowered to take on more complex tasks in the future.Diverse ExperiencesAWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.About AWSAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Mentorship & Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.BASIC QUALIFICATIONS• Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science or related field• Experience with Python, BASH or other scripting language• Developing network deployment infrastructure such as PXE• Experience working with system management components (BMC, BIOS, CPLD, etc)• Strong background working in UNIX environments ...

The Amazon Robotics Infrastructure Engineering team is looking for a Network Development Engineer (NDE) to join our team. We build and operate the network and services that enable Amazon Fulfillment Centers to deliver packages to Amazon retail customers. From two million square foot automated robotics fulfillment centers to small last-mile delivery stations in emerging markets, these networks are the backbone of Amazon Operations. Hundreds of thousands of associates rely upon these networks at thousands of locations, and are critical to the delivery of shipments to Amazon retail customers.Our mission is to design, deploy, and support networks that sets the global standard for performance, availability, security and cost, enabling Fulfillment and Logistic operations to deliver on time, every customer order. We are looking for a Network Development Engineer to create next-generation network products. The team is focused on automating networks from multiple diverse vendors, maximizing reliability while minimizing human touch in deployment and maintenance activities. We partner closely with IT support teams to ensure that simplicity in our product designs translate to supportability in the field. Information security rigor is at the core of everything we do. You will tackle challenging, novel situations every day and have the opportunity to work with multiple technical teams at Amazon in different locations. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. It is expected that you will be technically fearless, while at the same time being balanced and pragmatic in your approach. Along the way, we guarantee that you will learn a lot and make a positive impact on millions of people.The right candidate will have demonstrated experience leading large projects and have an expert level technical background in current networking technologies. You must be able to thrive and succeed in an entrepreneurial environment, and not be hindered by ambiguity or competing priorities. This means you are not only able to develop and drive high-level strategic initiatives, but can also roll up your sleeves, dig in and get the job done. As a NDE, you will anticipate bottlenecks, influence external vendors and internal team roadmaps, provide escalation management, anticipate and make tradeoffs, and balance the business needs versus technical constraints.Key job responsibilitiesAs a NDE, you will be expected to:· Write code for our most demanding, cross-functional networking projects.· Functionally decompose complex problems into simple, straight-forward solutions.· Fully and completely understand system inter-dependencies and limitations.· Effectively research and benchmark Amazon technology against other competing systems in the industry.· Contribute intellectual property through patents.· Assist in the career development of others, actively mentoring individuals and the community on advanced technical issues and helping managers guide the career growth of their team members.A day in the lifeAmazon offers a full range of benefits that support you and eligible family members, including domestic partners and their children. Benefits can vary by location, the number of regularly scheduled hours you work, length of employment, and job status such as seasonal or temporary employment. The benefits that generally apply to regular, full-time employees include:1. Medical, Dental, and Vision Coverage2. Maternity and Parental Leave Options3. Paid Time Off (PTO)4. 401(k) PlanBASIC QUALIFICATIONS- 4+ years of major internet routing protocols experience- 4+ years of working in a Linux/Unix environment experience- 4+ years of automation scripting using Python, Bash, Shell and/or Perl experience- Experience with AWS and AWS networking products such as Direct Connect and Transit Gateway ...

The Amazon Devices team designs high-profile consumer electronics, including the best-selling Amazon Echo, FireTV, Fire Tablets, Kindle, and Astro family of products. We are looking for a motivated individual contributor with 2+ years industry, research and/or consulting in sustainability related field, great communication skills, and the passion to collaborate with a cross-functional team to drive products and services sustainability across Amazon devices.Key job responsibilitiesAs a sustainability specialist, you will be working with Amazon devices cross-functional teams (across Hardware, Software, and Operations functions) to accelerate decarbonization areas including but not limited to energy efficiency, electronics component design and selection, sustainable materials, and circularity. You will serve as a subject matter expert in one sustainability domain (e.g. energy, environmental impact assessment, carbon, artificial intelligence) and use your skills to assess risks and/or resolve sustainability related problems in devices specific domain. You should be comfortable working with a wide variety of data, collaborating effectively with business owners at director level as well as engaging with LCA scientists/academics/NGOs to help advance Amazon Devices’ sustainability goals. You are expected to have a solid understanding of sustainability industry-specific domain practices, regulations, trends, and challenges, and be able to provide advice and guidance to colleagues and customers on how to navigate the sustainability technical, scientific, regulatory and reputational environment successfully. The ideal candidate will have prior experience conducting life cycle assessments (LCAs) or material flow analysis (MFA) of products or services, or knowledge of manufacturing, design, development, and sourcing. The successful candidate must have strong analytical skills and the ability to apply systems thinking to complex, fast moving business problems while dealing with uncertainty and data gaps. A day in the lifeIn this role, you be part of the Amazon Devices Sustainability Science and Engineering team. Your responsibilities will include: * Conduct Life Cycle Assessments (LCAs) for Amazon devices and accessories including modeling, data collection, data analysis, data visualization, and reporting; * Utilize and improve scalable mechanisms and tools for Amazon devices and accessories LCAs in collaboration with research scientist and software engineering teams;* Utilize reports, dashboards and metrics that distill complex data into actionable insights to inform product decisions; * Deliver clear documentation for sustainability assessments and can respond to time critical questions from internal customers;* Work with research scientists to implement innovative sustainability modeling tools and frameworks to drive business impact and support strategic decision-making.* Communicate professionally to director level business leaders and provide timely recommendations.About the teamAt Amazon, we are committed to and invested in sustainability because it’s a win all around – it’s good for business, the planet, our customers, and our communities. Amazon has co-founded and signed The Climate Pledge, a commitment to reach net zero carbon by 2040. This science-based goal is a multi-year carbon emissions reduction goal that is aligned with getting to carbon neutrality 10 years faster than the latest scientific guidance. In alignment with this bold corporate goal, the Amazon Devices & Services organization is hiring a Sustainability Specialist to provide expert knowledge, analyses, tools, and data support to enable internal and external customers make well-informed, sustainability science-based decisions. You will be part of the Amazon Devices Sustainability Science and Engineering (DSSE) team that’s responsible for empowering internal and external customers with expert knowledge, analyses, tools, and data needed to make well-informed, sustainability science-based decision. BASIC QUALIFICATIONS* Bachelor's degree in Science, Technology, Engineering, Mathematics or equivalent;* 2+ years of relevant industry experience;* 2+ years experience in program management and/or consulting in sustainability related field.* Practical experience in conducting product carbon footprint following international standards (i.e., ISO 14067, PAS 2050, GHG Product Protocol Standard);* Basic knowledge of product LCA and sustainable product design;* Experience working with stakeholders across both technical and business functions;* Independently driven, resourceful, and able to deliver results with minimal direction;* Experience working with cross-functional teams;* Strong written and verbal communication skills. ...