Hardware Development

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Come work at Amazon!The Role:As Senior Silicon ATE Test Engineer, you will engage with an experienced cross-disciplinary staff to conceive and design innovative product solutions. You will work closely with an internal inter-disciplinary team, and third party suppliers to drive key aspects of product definition, execution and optimization. You must be responsive, flexible and able to succeed within an open collaborative peer environment.You’ll be responsible for high-volume production test methodology for custom SoCs for Project Kuiper. You’ll be part of the team that creates a chip and system test infrastructure and methodology applicable to transmit and receive communication systems.In this role you will: Write test plans and test programs for SoCs tested on Teradyne and Advantest equipment. Convert test patterns from the DFT team into tester-suitable formats (e.g. ATP). Run test vectors on test platforms and optimize tester and vector parameters to ensure timing and repeatability.  Work with ASIC design teams ensure the test equipment and processes required for production meet Amazon standards for high-volume manufacturing. Review load board, socket, and probe card designs and simulation results for best layout practices and possible signal / power integrity issues. Optimize equalization settings for 30+ Gpbs SERDES running on ATE platforms. Actively identify test related readiness, issues, and optimizations throughout the product lifecycle and work towards expedient resolutions. Assist in qualification activities such as burn-in board design, HTOL, ESD, etc. Conduct failure analysis and drive issue resolutions as well as close potential test gaps and correlations issues throughout the supply and manufacturing chains. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS Bachelor's degree in electrical/communications engineering or related field, or equivalent experience. 7+ years of experience in High Speed Digital Test Engineering, preferably in high-volume consumer devices manufacturing. Strong written and verbal skills.International travel required during release to production phases. ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.This key role will be focused on increasing Kuiper Satellite production rate through continuous improvement strategies. In this role, you will be a senior member of the team that will drive improvements in a variety of areas such as manufacturing, testing and/or fulfillment processes. To deliver these complex solutions, you will partner with peers across all Kuiper teams, including hardware, software, manufacturing, quality, launch, test etc. Candidate superpowers should include earn trust, ownership, insist on high standards, continuous improvement, stakeholder management, innovation and simplification. The role is based in Redmond, WAKey job responsibilitiesThe Sr Process Engineer for ProdOps Continuous Improvement role is key to Kuiper's ability to increase satellite production rate. This role requires a strategic thinker with excellent leadership skills to enhance operational efficiency and foster a culture of continuous improvement. Their responsibility includes:- Driving a large continuous improvement portfolio of impactful projects- Autonomously own deep dives to root cause a specific process or area (product engineering). - Assess the effectiveness of all operational activities on site using specific analytical tools (eg. Kaizen, Six Sigma, DMAIC, VSM etc.) to generate proposals for waste-reduction and corrective actions.- Enhance operational efficiency and foster a culture of continuous improvement- Embody Amazon's Leadership Principles to achieve operational excellence and drive transformative change- Identify and own improvements through process recommendations, equipment requests, manufacturing executions system (MES) improvement, design for manufacturing, etc.- Mentor and develop junior engineers Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThis role will be highly collaborative, requiring partnerships with cross-functional leaders to drive positive results. This role requires ability to advocate on behalf of our customers (internal and external) and an ability to push back without being adversarial.You will tackle challenging, novel situations every day and have the opportunity to work with multiple technical teams at Amazon in different locations. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun and make a positive impact on millions of people.About the teamThe Operations Command Center (OCC) team is the Kuiper Production Operations Integrated program management function that enables successful production scaling. The vision of OCC team is to enable success of end-to-end Kuiper operations team by proactively developing systems, processes, mechanisms, and tools that are required to detect issues, expose root cause, validate improvements, maintain controls, and drive operational rhythms.- Experience working with interdisciplinary teams to execute product design from concept to production- Bachelors (BS) in Mechatronics Engineering, Robotics, Electrical Engineering, Mechanical Engineering, Industrial Engineering, other STEM discipline, or equivalent experience.- 6+ years experience in Mechanical Design, Manufacturing or Tooling Engineering.- 3+ years leading continuous improvement initiatives, managing operations, or a related role within the manufacturing, fulfillment or testing organization driving automation, LEAN/Six Sigma, 5S initiatives.- Excellent analytical and problem solving skills including working knowledge of data analysis and statistics.- Master's degree in electrical engineering, computer engineering, or equivalent- Experience with the project management of technical projects- Experience working in the aerospace or aviation industry- Experience in setting up or launching new industrial processes (start-up)- Knowledge of enterprise resource planning (ERP) and manufacturing execution system (MES) software.- Certified Six Sigma Green Belt or higher- Experience in High Volume Production- High sense of ownership, urgency, and drive.- Ability to communicate effectively with both technical and non-technical individuals.Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.We are looking for an outstanding Thermal Design Engineer who combines strong technical, research and analytical capabilities with a demonstrated ability to get the right work done quickly and effectively. The successful candidate must have experience working on thermal control of consumer electronics products, producing top notch thermal analysis and providing essential thermal related input and recommendations to system architects and subsystem leads.Key job responsibilities - Support extensive architectural trades with preliminary thermal analysis on printed circuit boards. - Perform detailed and comprehensive analyses of integrated circuit components, using finite element analysis. - Conduct computational fluid analyses for multiple design conditions. - Drive design optimization for performance, mass and cost, while meeting system reliability requirements through application of a range of thermal control hardware options. - Design, analyze and select heat pipes as needed for overall system solution. - Develop automated scripts enabling rapid analysis updates accommodating trades (e.g., power states, duty cycle, structural mapping). - Define, lead and execute thermal cycling for development and qualification tests. - Correlate thermal models based on test results. - Define and select test equipment as needed (e.g., thermal chambers, sensors, data logging equipment, infrared cameras, thermocouples, power supplies) - Conduct testing of prototypes and engineering models for fast design feedback loops. - Document trades and design evolution, and present results during design reviews.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.- Bachelor’s degree in mechanical engineering or related discipline, or equivalent experience.- 3+ years of experience with analysis simulation software, including writing custom scripts to enable rapid design trades and iterations for thermal systems for various operational cases.- 2+ years experience with computational fluid dynamics packages (e.g., ANSYS Fluent, ANSYS Icepak, OpenFoam)- 2+ years experience with finite element analysis packages (e.g., ANSYS Mechanical)- 2+ years experience with test planning, test set-up, results correlation and system verification for production.- 2+ years experience in development and/or selection of thermal control hardware (e.g., materials and finishes, thermal interface materials, heat-pipes, radiators, temperature sensors, and heaters).- Advanced degree (Master’s or PhD) in mechanical engineering or related field.- CAD skills (NX or Solidworks)- Experience with thermal design implementations for high volume production.- Design for batch testing for subsystem workmanship tests- Experience with Thermal DesktopAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit This position will remain posted until filled. Applicants should apply via our internal or external career site.

Do you thrive in a dynamic environment where technical expertise meets strategic thinking? Are you passionate about ensuring the safety and compliance of hardware products? If so, step into the exciting role of Hardware Compliance Technical Program Manager (TPM) at Amazon Lab126!In this role, you'll lead a critical strategic initiative, spearheading a large scale mechanism to drive awareness, advocacy and implementation of legislation, regulation and standard development within the hardware compliance industry. We are looking for someone who brings a unique combination of depth understanding and experience in applying technical standards in consumer electronics. Have a strong grasp of regulatory affairs in US and EU and can effectively program manage the execution of new rules and regulation. Your technical expertise in compliance engineering, combined with your strong program management skills, will ensure our products meet evolving regulatory landscapes.Key job responsibilities* Proactively monitor emerging regulatory trends and identify potential impacts on our product lines.* Develop and manage comprehensive programs to address new rules and regulations, translating complex legal and technical requirements into actionable plans for the team.* Collaborate with internal stakeholders across engineering, product development, legal, and public policy to ensure alignment and smooth implementation of compliance programs.* Build and maintain relationships with industry associations, regulatory bodies, and standards development organizations to stay informed and potentially influence new regulations.* Deliver in a fast-paced and often uncertain environment, while demonstrating leadership, technical competence, and strong communication skills.* Track key performance indicators (KPIs) to measure the success of compliance programs and identify areas for improvement.* Develop and document processes to continually improve efficiency and reduce complexity in operations.About the teamYou will be part of the Hardware Compliance Engineering team responsible for compliance and international approval of Amazon consumer devices. We do this by leveraging our global diverse foundation of subject matter experts and robust processes and mechanisms. Come be a part of the team with the mission to enable safe and compliant products to customers worldwide.BASIC QUALIFICATIONS- 5+ years of working directly with engineering teams experience- 5+ years of technical product or program management experience- Experience managing programs across cross functional teams, building processes and coordinating release schedules- Bachelor's degree in engineering, computer science or equivalent.- Experience navigating the lifecycle of a new regulation from proposal to legislation and advocacy to passed law.- Experience with regulatory affairs within the hardware industry. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Come work at Amazon!As a Hardware Development Engineer (HDE), you will engage with an experienced cross-disciplinary team to conceive and design innovative product solutions. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team to design and deliver hardware for the payload. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesAs a HDE, you will be a part of the team of experts working on the development of advanced electronic products. You will own or contribute to the following: • Design digital and analog and/or RF circuits in collaboration with various teams • Design and optimization of different blocks of electronics sub-systems. • Design for high speed and FPGA circuitry. • Optimize board design for high-speed clocks, transmission lines and their terminations. • Design and optimization of different blocks of electronics sub-systems. • Perform schematic capture and lead PCB layout implementation. • Work with software teams to determine requirements for FPGA and processor designs.• Bring up Linux on embedded systems. • Support flow-down requirement definitions and generate test plans/procedures • Board bring-up and perform test campaigns of modules and subsystems • Support design automated test systems, test fixtures and factory test• Work in the lab environment with various equipment like Oscilloscopes, Spectrum Analyzers, Logic Analyzers, Network Analyzers, etc. A day in the lifeAs a HDE, you will work in a multi-disciplinary environment to design and deliver hardware for space. This requires the ability to work from concept to production. Candidates must be comfortable to work in the lab to debug and verify their designs. About the teamThey cover a wide range technical areas from power supplies, high speed digital, mixed signal, and RF. So members of this team need to be comfortable in multiple domains.BASIC QUALIFICATIONS- BS degree in electrical engineering or computer engineering, or equivalent experience · 3+ years of experience in hardware development across full product life cycle.- 3+ years of experience in using schematic capture tool and PCB layout viewer- 3+ years of experience board bring up and debugging in lab environment- 3+ years of experience using lab equipment including soldering irons, hand-tools, oscilloscopes, logic analyzers, and spectrum analyzers ...

Working at Amazon RoboticsAre you inspired by invention? Is problem solving through teamwork in your DNA? Do you like the idea of seeing how your work impacts the bigger picture? Answer yes to any of these and you’ll fit right in here at Amazon Robotics. We are a smart team of doers that work passionately to apply cutting edge advances in robotics and software to solve real-world challenges that will transform our customers’ experiences in ways we can’t even image yet. We invent new improvements every day. We are Amazon Robotics and we will give you the tools and support you need to invent with us in ways that are rewarding, fulfilling and fun. Job Overview Amazon Robotics is seeking a Production Technician who will be responsible for Robotics assembly, Material Handling, and product packaging. Job Requirements: Production Technicians are members of the Assembly and Logistics teams within the general manufacturing team responsible for building, automated testing, and packaging of Amazon products manufactured internally.Key job responsibilitiesProduction associates use their general knowledge of manufacturing tools (including but not limited to torque tools, wrenches, channel locks, etc.) and follow written/verbal instructions to perform the following:• Required tasks and build electro-mechanical units utilizing industry best practices. • Shipping, receiving, maintaining, tracking, and delivering goods for manufacturing following appropriate protocols. • Learning systems and tools for material management as well as coordinate methods of delivery with suppliers and customers• Seeking out improvements in processes to continuously meet on time delivery of goods. • Ability to operate Power Industrial Equipment & pallet jacks for loading and unloading trailers• General knowledge of manufacturing tools (including but not limited to torque tools, wrenches, channel locks, etc.) and follow written/verbal instructions BASIC QUALIFICATIONSRequired Qualifications1. Ability to lift 50 pounds2. Read and follow English language instructions3. Able to work safely in structured manufacturing environments ...

As a Sustaining Electrical Engineer you will engage with an experienced cross-disciplinary staff to sustain and improve the design of critical satellite hardware. You will work closely with an internal inter-disciplinary team, and outside partners to drive key aspects of product definition, execution and test. You must be responsive, flexible and able to succeed within an open collaborative peer environment.You will work within the RF Hardware Engineering team to debug failures at the CM and at Kuiper. This will be a hands-on position to support all design validation, manufacturing test and reliability aspects of design, development; including alternate source component selection and qualification. You will drive system validation activities for new products development, to implement design changes for sustaining products, to resolve technical issues for manufacturing process, and to perform failure analysis for Acceptance Test (ATP) failed units. In this role, you will: • Debug failing PCBAs in manufacturing and acceptance tests. • Perform DFM and DFMEA reviews within the RF HW design group, with CM and suppliers.• Develop system test plans for design validation. • Define test methodology and test coverage to assure product reliability.• Monitor quality metrics from design validation manufacturing test, acceptance test (ATP), and reliability.Export Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitieso Support MP (Mass Production) yield and PRQ activitieso Apply lessons learn to next generation product developmento Understanding of high-volume product design margin and manufacturing processo Troubleshooting/Root cause analysis methodologyo Capable of schematic capture and PCB layouto Understanding of component selection and requirements specificationso Ability of deep dive. This is a very important leadership principle to assesso Experience of working with CM and component suppliersAbout the teamThe RF Hardware and Systems team is full of talented engineers who are the best of the best. They cover a wide range technical areas from power supplies, high speed digital, mixed signal, and RF. So members of this team need to be comfortable in multiple domains.- BS degree in electrical engineering or equivalent- Experience in hardware design or testing experience on electronic devices.- Knowledge of Linux-based systems bring-up.- Experience in hardware debug of analog, digital, and high speed circuitry- Experience to use test instruments such as oscilloscope, spectrum analyzers, and logic analyzer.- Experience on reliability test methodologies such as HALT, HASS.- Exposure to high volume manufacturing.- Familiarity with FPGAs and processors- Familiarity with DC power supply designs.- Familiarity with analog electronics fundamentals (transistor, op-amps, filters, etc).- Knowledge of RF Design and testing.- Knowledge of signal integrity and timing on PCB layout.Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit This position will remain posted until filled. Applicants should apply via our internal or external career site.

Are you inspired by invention? Is problem solving through teamwork in your DNA? Do you like the idea of seeing how your work impacts the bigger picture? Answer yes to any of these and you’ll fit right in here at Amazon Robotics. We are a smart, collaborative team of doers that work passionately to apply cutting edge advances in robotics and software to solve real-world challenges that will transform our customers’ experiences in ways we can’t even image yet. We invent new improvements every day. We are Amazon Robotics and we will give you the tools and support you need to invent with us in ways that are rewarding, fulfilling and fun. Job Overview – As an Amazon Robotics mechanical engineer, you will develop innovative system architectures and hardware designs for our robotic systems. The ideal candidate has experience- Designing and analyzing mechanical systems, - Enthusiastically enjoys analytical problem solving and possesses practical knowledge of high volume manufacturing methods; such as, stamping, extrusion, casting, and injection molding. - This position reports directly to the Mechanical Engineering Manager. Key job responsibilitiesThe Mechanical Engineer will be responsible for:- Collaborating with an interdisciplinary team to execute product designs from concept to production including specification, design, prototyping, validation and testing- Working with the Operations, Manufacturing, Supply Chain and Quality organizations as well as vendors to ensure a smooth product launch- Writing functional specifications, design verification plans, and functional test procedures- Exhibiting role model behaviors of thorough engineering analysis and cradle to grave ownership- Design and adaptation of holistic hardware solutions for ambiguous problems with fluid requirements.A day in the lifeAmazon offers a full range of benefits that support you and eligible family members, including domestic partners and their children. Benefits can vary by location, the number of regularly scheduled hours you work, length of employment, and job status such as seasonal or temporary employment. The benefits that generally apply to regular, full-time employees include:1. Medical, Dental, and Vision Coverage2. Maternity and Parental Leave Options3. Paid Time Off (PTO)4. 401(k) PlanIf you are not sure that every qualification on the list above describes you exactly, we'd still love to hear from you! At Amazon, we value people with unique backgrounds, experiences, and skillsets. If you’re passionate about this role and want to make an impact on a global scale, please apply!BASIC QUALIFICATIONS- 4+ years of working in mechanical engineering or equivalent experience- Bachelor's degree in mechanical engineering or equivalent- SolidWorks or similar CAD experience with best practices for part design, advanced assemblies, complex configuration management- Hands on experience crafting simple proof-of-concept models- Thorough understanding and use of principals, theories and concepts in mechanical engineering- Strong organizational skills and the ability to work well with cross-functional teams- Ability to effectively communicate concepts and write technical documents ...

The Amazon Web Services (AWS) Center for Quantum Computing (CQC) in Pasadena, CA, is looking to hire an Equipment Engineer who will aid in AWS’s effort to bring cloud quantum computing services to its worldwide customer base. The candidate will work in a cleanroom environment alongside research scientists and process engineers, keeping complex semiconductor fabrication & characterization equipment in working order. Responsibilities include troubleshooting equipment-related issues, performing preventative maintenance and calibrations, interacting with vendors during the installation of new equipment and scheduled repairs, making self-guided & team-guided improvements to the lab infrastructure, and taking the lead on aspects of our overall equipment health program. The facility is focused on research and development, which utilizes equipment ranging from ICP-RIE etchers, to various material deposition tools, to advanced characterization instruments, most of which are classified as vacuum systems. The candidate will evaluate and develop procedures that provide maximum tool up-time for wafer processing and characterization while maintaining the equipment at optimal performance. Candidates must have a demonstrated background in fundamental engineering principles and must have excellent problem solving and communication skills. Successful candidates will have prior experience working in an academic or industrial fabrication facility, or similar. Working effectively within a team environment is critical.Key job responsibilitiesAn Equipment Engineer troubleshoots problems related to equipment and other lab infrastructure, then devises and documents the solutions such that the problems can be more easily solved the next time they occur. When necessary, the Equipment Engineer works with field service engineers from the company that manufactured the equipment, scheduling service calls and supervising & documenting those engineers' work in our labs. The Equipment Engineer is responsible for improving the up-time of equipment, which involves developing and executing better preventative maintenance plans, devising new mechanisms for tracking parts and service, performing equipment calibrations, implementing new equipment-tracking initiatives in our manufacturing execution system (MES), and obsessing over the details of the equipment such that it can operate at peak performance. The Equipment Engineer assists with the development and implementation of custom hardware modifications and new lab upgrades. The Equipment Engineer has ownership of equipment and lab spaces and is responsible for the reliable, excellent performance of our labs and everything that operates within it.A day in the lifeThe Equipment Engineer performs a daily morning lab walkthrough to assess the state of their assigned lab areas and equipment. Based on priorities set by the team, the engineer works on solving new problems or existing problems from the previous day. Preventative maintenance checks and/or calibrations are performed according to a schedule. When time permits and there aren't problems to solve that are limiting team productivity, projects centered around the improvement of equipment and lab spaces are undertaken. In all aspects of the work, documentation of notes, procedures, fixes, and projects is pivotal. The engineer's goal is to maximize equipment up-time and performance so their teammates can operate the equipment reliably, and the whole team can deliver fabricated devices for quantum computing experiments.About the teamOur team is comprised of scientists and engineers who are building hardware that enables quantum computing technologies. Doing that requires the fabrication of quantum devices, which necessitates the operation of a suite of fabrication and characterization equipment. Equipment Engineers work to maintain and improve the equipment – and the labs in which the equipment is installed – and work alongside Process Engineers and Research Scientists to help deliver fabricated devices for quantum computing experiments.About AWSDiverse ExperiencesAWS values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying. Why AWS?Amazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Mentorship & Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud. This team is part of AWS Utility Computing: Utility Computing (UC) AWS Utility Computing (UC) provides product innovations — from foundational services such as Amazon’s Simple Storage Service (S3) and Amazon Elastic Compute Cloud (EC2), to consistently released new product innovations that continue to set AWS’s services and features apart in the industry. As a member of the UC organization, you’ll support the development and management of Compute, Database, Storage, Internet of Things (Iot), Platform, and Productivity Apps services in AWS, including support for customers who require specialized security solutions for their cloud services.- 4+ years of working in mechanical engineering or equivalent experience- Experience with maintaining and servicing fabrication and/or characterization equipment- Experience using common lab tools for troubleshooting (e.g., multimeters, oscilloscopes, etc.)- Master's degree in mechanical engineering or equivalent- Knowledge of SolidWorks simulation or Ansys Finite Element analysis tools- Experience with vacuum, high vacuum, and/or ultra-high vacuum systems- Excellent problem solving, analytical, writing and communication skills- Curiosity and capability to rapidly research and learn new tools, techniques and technical topics- Self-starter with excellent organizational skillsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.Los Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees, supervisors, and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees, supervisors, and staff to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations and the Company’s reputation. Pursuant to the Los Angeles County Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit This position will remain posted until filled. Applicants should apply via our internal or external career site.

The Mechanical Engineer designs automated packaging platforms and supporting systems to enable faster and more efficient delivery to Amazon's customers.The primary role of the Mechanical Engineer is to provide technical ownership and refinement of the packaging platforms and automation systems. Working with the Electrical and Controls teams, the Mechanical Engineer will execute the design and manufacturing of Amazon's in-house packaging machinery and automation.Key job responsibilities- Collaborate with cross-functional engineers to design and execute packaging machinery and automation projects- Collaborate in the mechanical design work-streams, including modeling, load/bearing calculations, and 3D/2D design- Ensure project documentation is complete and scalable for manufacturing- Support safety certification of projects/platforms- Participate in meetings to optimize for customer experience, supply chain, and sustainabilityAbout the teamThe Mechatronics and Sustainable Packaging (MSP) team develops automated solutions and sustainable packaging across Amazon's operations, focusing on customer experience and waste reduction.- 4+ years of working in mechanical engineering or equivalent experience- Experience with prototyping and implementation- BA in Mechanical or Mechatronics Engineering- 5+ years packaging machinery design experience- Proficiency in 3D design and simulation software including but not limited to Ansys, Creo, Catia, Solidworks- Knowledge of SolidWorks simulation or Ansys Finite Element analysis tools- Experience in the design of complex mechanical products and equipment at volume- PLM, GD&T, and manufacturing process knowledge- Understanding of packaging machinery safety standards- Operations experience in a manufacturing environment- Advanced simulation expertiseAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

The Lead Interdisciplinary Systems Engineer creates automated packaging platforms and supporting systems to enable faster and more efficient delivery to Amazon's customers.The primary role of the Lead Interdisciplinary Systems Engineer is to lead the conceptualization and technical development of next-generation packaging platforms and supporting automation systems. This involves designing, simulating, and building packaging machinery and automation that simplifies the fulfillment network, reduces delivery times, and exceeds customer packaging expectations.Key job responsibilities-Define, expand, and explore the design space for complex, multidisciplinary robotics and automation problems-Identify and analyze the cross-functional tradeoffs between design alternatives, including impact on performance, schedule, cost, risk, complexity, and scale-Break down and frame problems using CONOPS, use cases, structural/functional decompositions, and other system representations to clarify needs and align technical teams-Identify design choices to ensure our products are safe, reliable, and usable, and can be deployed and supported at Amazon scale-Build quantitative models and analyses (Excel, MATLAB, Python, internal tools) to conduct trade studies, refine requirements, and understand key system drivers across the integrated systems of systems-Perform technical risk assessments (such as TRL, Gap Analysis, FMEDA, HARA, etc.), devise mitigation plans, and create system test strategies-Develop and communicate system integration and evaluation strategies and plans in support of program learning, technical risk reduction, verification, and validation-Drive and prioritize execution of system test campaigns that span lab and field testing environments in collaboration with subsystem development and test teams (test readiness reviews, test execution, post-test analysis and reporting)Mentor junior engineers in systems engineering best practices, and participate in hiring of new team membersAbout the teamAligning mechatronics and packaging into one organization, (Mechatronics and Sustainable Packaging, MSP) enables Amazon to develop, deploy and scale automated solutions across the Amazon Fulfillment Network, especially from Pick to SLAM for the Automated Robotics Sortable (ARS) network. This group works backwards from deep customer insights to deliver solutions that seamlessly integrate into brownfield and greenfield deployments with safety as a top priority. In addition, Sustainable Packaging solutions are a thread that impacts and connects all parts of the Amazon Stores supply chain and customer experience. They take ownership for the entire packaging experience including selling partner design, first/middle/last mile and total customer experience. They eliminate waste and packaging wherever possible. Where Amazon added packaging is required, they are transitioning from single-use plastics to curbside recyclable paper-based materials.BASIC QUALIFICATIONS-Experience with eliciting and clarifying business and end user needs, and connecting those needs to system concepts, requirements, and designs-Experience leading technical collaborations and creating alignment across diverse groups (e.g., technical disciplines, subsystem teams, development partners) -Experience identifying and analyzing dependencies, tradeoffs, and sensitivities across multi-disciplinary systems -Understanding of systems engineering tools and best practices, and the ability to tailor the processes to help new product development teams go fast-Experience developing test strategies and plans for complex hardware/software systems or system of systems.-BS or equivalent in Electrical Engineering, Aerospace Engineering, Mechanical Engineering, Computer Science, Computer Engineering, Systems Engineering, Operations Research, Mathematics, Physics, or another STEM discipline 10+ years of experience ...

Do you enjoy solving complex problems and driving influential changes? Are you curious about the systems used to run the largest cloud computing infrastructures in the world? Do you thrive in a fast paced and ever-changing environment? If you answered YES to these questions, then our team is looking for you! The AWS Board Core Design & Services team drives system innovation in the servers used by all of Amazon Web Services, including EC2, S3 and CloudFront. Our engineers solve the hardest problems that fuse software, hardware, and the cloud. We take big bets on new concepts, enabling AWS services to continue to revolutionize the industry.What you will do: As a member of the AWS Board Core Design & Services team you will own next-generation server components. You will have demonstrated results in the architecture and development of components used in servers, in areas such as motherboards, graphics, accelerators, and programmable hardware. You will interact with an interdisciplinary team of engineers to design, develop, validate, and launch at large scale. You’ll provide leadership in the application of new technologies to servers in a continuous effort to deliver and improve a world-class customer experience. This is a fast-paced, intellectually challenging position. You will work with thought leaders in multiple technology areas. You have high standards for yourself and everyone you work with. You will be constantly looking for ways to improve performance, quality, and cost. At AWS we are changing an industry and want individuals who are ready for a challenge to reach beyond what is possible today.Why it matters: Public cloud IT services represent the majority of growth in the overall IT services market and will continue to do so for several years to come. The scale of AWS creates a unique opportunity for differentiated hardware that will directly benefit customers.Why you will love it: You will build next-generation hardware that powers the cloud. You will deliver improvements for our customers and have a direct impact on our bottom line. You will be part of a growing, fast paced, and fun team. You will have ownership for the implementation of your work.A day in the lifeHardware engineers within AWS Board Core Design & Services team could be working in a variety of areas, few examples would be: hardware design and development; building the systems that validate hardware quality in manufacturing; monitoring and improving hardware reliability in data centers and platform. We cover everything from low level hardware to embedded software and systems that operate and monitor it. There is no blueprint for how to do what we do, which encourages our engineers to identify and develop simple solutions to complex problems. We encourage durable solutions that look around corners while taking into consideration our customer needs from a cost, performance, and reliability perspective. About the teamWithin AWS AWS Board Core Design & Services team, our organization is responsible for system innovation in the servers used by all of Amazon Web Services. Beyond product delivery we actively manage the fleet of Servers in the data center that keeps growing. This means tracking key business and operational metrics to ensure that we operate smoothly and minimize or eliminate customer impact due to device related issues for a transparent AWS customer experience.- BS Electrical/Computer Engineering (or equivalent experience)- 7+ years of experience in embedded ARM, FPGA, and CPLD applications- 7+ years of experience with flash, I2C, SPI, UART, and ethernet interfaces- 7+ years of experience in collaborating with the ECAD/physical board designer and able to review PCB designs with Allegro, CAM350, or equivalent.- 7+ years of experience in developing functional specifications, design verification plans and functional test procedures- 7+ years of experience in board root cause analysis and resolution- Master's degree in electrical engineering, computer engineering, or equivalent- 10+ years of experience in server design for cloud or enterprise applications- Strong expertise motherboard and peripheral component design, PCB design, schematic capture, stackup, and circuit board layout.- Experience in designing for reuse across multiple products- Experience with server technologies such as: power optimization, thermal, mechanical, BIOS, BMC, signal integrity, networking.- Commitment to rigorous testing practices and design process flows- Strong organizational and planning skill- Desire to work in a fast-paced environment- Ability to resolve complex issues in creative ways- Excellent written (white papers) and oral communication skills- Experience in component selection and understanding of component reliability.- Experience in design for large scale applications.- Experience working with interdisciplinary teams to execute product design from concept to production.- Experience with the management of technical programs a plus.- Meets/exceeds Amazon’s leadership principles requirements for this role- Meets/exceeds Amazon’s functional/technical depth and complexity for this roleAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees, supervisors, and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees, supervisors, and staff to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations and the Company’s reputation. Pursuant to the Los Angeles County Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit This position will remain posted until filled. Applicants should apply via our internal or external career site.

Are you inspired by invention? Is problem solving through teamwork in your DNA? We apply advances in robotics and software to solve real-world problems that delight our customers' experiences in ways we can't even imagine yet. Amazon Robotics is located in the greater Boston area, the epicenter of robotics innovation. Our diverse team of engineers come from all over the world to design, test and build our dynamic fleet of robots and mechatronic systems. Having our offices, labs, test floors and factories all co-located means that we can design the hardware, write the code, test, build and watch it all come to life. This allows us to innovate quickly and on limitless ideas. Current advancements are underway in autonomous movement and mobility, artificial intelligence and machine learning, manipulation, simulation, robotic management software, predictive analytics, and much more. The Amazon Robotics (AR) Operations organization oversees the manufacturing of high-quality robotics and gets the right materials to the right place at the right time to enable our automated solutions. It’s a fast-paced operation that works cross-functionally with teams across Amazon globally, and is driven by data and performance indicators. We are seeking a talented and motivated Manufacturing Test Development Engineer with a proven track record of implementing best in class test techniques and processes within a complex manufacturing environment. This role will report to the manager of the Manufacturing Test and Controls - (Test Development & infrastructure) team for Manufacturing test services products and is part of the technical operations team. You will be responsible for developing and implementing test strategies and solutions for new products, with a focus on automation and improving product quality. You will actively work with engineering, production, junior test engineers, and external vendors to deliver the highest quality products with the lowest cost.Key job responsibilities* Support and foster a culture of inclusion.* Develop electrical test equipment and respective test code that is used for acceptance testing of electromechanical systems and subsystems.* Specify and guide external in-circuit-test (ICT) development with external vendors.* Write test procedures, test specifications, and acceptance criteria for new products.* Review PCBA schematics and layouts and propose design changes that will enhance product manufacturability and testability.* Design interface PCBAs for use in test fixtures.* Willingness to “roll up sleeves and do what needs to get done” in a small, specialized, team environment.* Spend up to 30% of your time traveling.A day in the lifeYour goal is to push defect detection as far upstream as possible to minimize early life defects during deployment.You will use a variety of methods to achieve this, including automated board behavior testing, debug and configuration tools, and vendor analysis.About the teamMTAC (Manufacturing Test & controls) is a team responsible for developing and implementing manufacturing-level testing for electrical boards and sub-assemblies. We work closely with hardware engineering to ensure that our tests are comprehensive and effective.BASIC QUALIFICATIONS- Bachelor's degree in electrical engineering or equivalent- 5+ years related work experience in environments that are fast paced and require multitasking- Demonstrated expertise in developing and implementing manufacturing test strategies for electrical subassemblies- Proficiency writing code to control test equipment and devices under test (DUTs) using standard software tools- Experience designing PCBAs of medium-to-high complexity- Experience delivering test solutions to manufacturing facilities ...

Are you inspired by invention? Is problem solving through teamwork in your DNA? Do you like the idea of seeing how your work impacts the bigger picture? Answer yes to these questions and you'll fit right in here at Amazon Robotics. We are a smart team of doers who work passionately to apply cutting edge advances in robotics and software to solve real-world challenges that will transform our customers experiences in ways we can't even image yet. We invent new improvements every day.Amazon Robotics empowers a smarter, faster, more consistent customer experience through automation. Amazon Robotics automates fulfilment center operations using various methods of robotic technology including autonomous mobile robots, sophisticated control software, language perception, power management, computer vision, depth sensing, machine learning, object recognition, and semantic understanding of commands. Amazon Robotics has a dedicated focus on research and development to continuously explore new opportunities to extend its product lines into new areas.Amazon Robotics is seeking a talented and motivated Mechanical Engineering student to join our Hardware Development Engineering team for a Co-op assignment. The candidate will have the opportunity work with senior engineering staff on existing and new and existing tools, mechanisms, modules and systems. The ideal candidate has strong mechanical aptitude, enjoys problem solving and can potentially handle multiple parallel tasks. This position reports to a Hardware Development Engineer on the Amazon Robotics team. This role is a 6 month co-op to join AR full time (40 hours/week) from January to June 2025. Amazon Robotics co-op opportunities will be based in the Greater Boston Area, in our two state-of-the-art facilities in Westborough and North Reading, MA. Both campuses provide a unique opportunity for interns to have direct access to robotics testing labs and manufacturing facilities.Co-op Responsibilities:· Work as part of an interdisciplinary team to design and analyze mechanisms, modules or systems· Model and detail solutions in hand sketches and SolidWorks· Analyze components and systems using standard tools including SolidWorks Simulation (FEA) as well as hand calculations· Participate in brainstorming sessions· Build models and prototypes· Conduct testing· Support staff writing ECO's, specifications and plans· Create GD&TA day in the lifeIf you are not sure that every qualification on the list above describes you exactly, we'd still love to hear from you! At Amazon, we value people with unique backgrounds, experiences, and skillsets. If you’re passionate about this role and want to make an impact on a global scale, please apply!BASIC QUALIFICATIONS- Must be currently enrolled in a Bachelor's degree or Master's degree in Mechanical Engineering, Industrial Engineering, or a similar degree- Must have at least one semester/term/quarter of school left to complete after the end of the co-op- Must be eligible and available for a full-time (40h / week) 6-month co-op between January - June 2025- Graduation is December 2025 or later ...

Amazon Web Services (AWS) internships are full-time (40 hours/week) for 12 consecutive weeks during summer. By applying to this position, your application will be considered for all locations we hire for in the United States.In Annapurna Labs we are at the forefront of hardware co-design not just in Amazon Web Services (AWS) but across the industry. The work we do is cutting-edge and internet-scale while also being deeply important to our customers. We design and build every component of our hardware and software to come together into products that our customers use for accelerated computing through Machine Learning acceleration and FPGA acceleration. If you are interested in "building a complete product" from inception to delighted customers, Annapurna is a fantastic choice.If this sounds exciting to you - come build the future with us!Responsibilities: • Develop a deep understanding of end customer requirements including software applications, use models, system architecture and SoC architecture/micro-architecture solutions.• Participate in logic design activities as part of Amazon's machine learning custom silicon solutions. • Develop and execute design automation mechanisms and flows.• Work with physical design teams to achieve performance and area requirements.Mentorship & Career GrowthOur team is dedicated to supporting new team members in an environment that celebrates knowledge sharing and mentorship. Projects and tasks are assigned in a way that leverages your strengths and helps you further develop your skillset.Inclusive Team CultureHere at AWS, we embrace our differences. We are committed to furthering our culture of inclusion. We have ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences.Work/Life HarmonyOur team puts a high value on work-life harmony. It isn’t about how many hours you spend at home or at work; it’s about the flow you establish that brings energy to both parts of your life. We believe striking the right balance between your personal and professional life is critical to life-long happiness and fulfillment. We offer flexibility and encourage you to find your own balance between your work and personal lives.BASIC QUALIFICATIONS- Enrolled in a Bachelors’ degree program or higher in Electrical Engineering, Computer Engineering, or a related field with a graduation conferral date between December 2025 and September 2026- Programming experience in System Verilog or UVM ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The Role:Be part of Project Kuiper’s sub-team responsible for defining and implementing the digital chip SOCs for communications via Low Earth Orbit satellites and Amazon gateways. This is a unique opportunity to define a groundbreaking wireless solution with few legacy constraints. The team works with customer requirements and wireless system teams to define modems, high-speed interfaces, embedded processors, and DSP solutions in latest CMOS generation technologies.In this role you will:• As the implementation lead you will set up the flow for both logic and physical synthesis flow for various technology nodes.• Work with the ASIC design and DFT teams to understand the design and create timing constraints.• Check the RTL design for clean synthesis run, perform STA and LEC on netlist.• Work with RFIC teams to make sure the top level integration of analog blocks are done properly and correct by construction, including formal connectivity checks.• Work with P&R teams to ensure a smooth hand off of netlists, ensure the timely execution of the P&R responsibilities by that team.• Participate in flow reviews of all the blocks with the P&R team to ensure that they achieve the best PPA for all blocks.• Lead the timing sign-off for the post P&R database.• Ensure that the chip meets the required DFM criteria by verifying the IR/EM results. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. BASIC QUALIFICATIONS • Bachelor's degree in Electrical / Communications Engineering or related field, or equivalent experience.• 7+ years of experience in ASIC implementation, i.e., synthesis, STA and working with P&R for deep sub-micron nodes, preferably 16nm or smaller.• Experience leading or solely developing the methodology and scripts for physical synthesis.• Proven track record in taping out chips that have gone in to high volume production.• Familiar with implementing chips that have multiple power islands and power gating. ...

We are looking for a Senior Manufacturing Test Engineer to develop solutions that require significant innovation for our Amazon Dash Cart team, located in Hudson, MA. Amazon Dash Cart allows shoppers to checkout without lines — you just place the items in the cart and the cart will take care of the rest. When you’re done shopping, you leave the store through a designated dash lane. We charge the payment method in your Amazon account as you walk through the dash lane and send you a receipt. Designed and custom-built by Amazonians, our Dash Cart uses a variety of technologies including computer vision, sensor fusion, and advanced machine learning. Check it out at . As a Senior Manufacturing Test Engineer (MTE) within our team, you will engage with a skilled and accomplished cross-disciplinary staff to conceive and design innovative technologies. You will collaborate with internal and external stakeholders to drive key aspects of technology solution definition, execution and validation. Some of the key job functions of the Senior MTE include: - Actively foster and drive culture of inclusion.- Develop or implement manufacturing test strategies and solutions for electrical, optical, and mechanical hardware.- Document test procedures, test specifications, and acceptance criteria for new and current products.- Guide and implement the design of automated test solutions, including electrical interfaces, interface test adapters, and software- Propose design changes that will enhance product manufacturability and testability.- Write programs to control test equipment and devices under test using standard software tools.- Evaluate and approve product Engineering Changes Orders (ECOs).- Support EOL test stations at international contract manufacturers and system integrators.- Persistently promote a safe working environment by following all safety procedures.- Up to 30% travel required.About the teamDiverse ExperiencesAmazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why flexible work hours and arrangements are part of our culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Inclusive Team CultureHere at Amazon, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Mentorship and Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.- BS in Electrical, Mechatronics Engineering or a related technical field- 5+ years of related work experience in a fast-paced manufacturing/test engineering focused environment.- Experience with debugging DC electrical systems.- Functional knowledge of one or more programming languages (LabVIEW/MATLAB/Python or similar)- Demonstrated expertise in test strategy development, ability to define test requirements, and implement manufacturing EOL test solutions to support NPI programs- Working knowledge of basic electrical equipment, electro-mechanical controls, and test equipment- Experience with reading and debugging with electrical schematics.- Master’s degree in Electrical, Robotics or Mechatronics Engineering.- Working knowledge of Electrical & Safety Standards, functional safety systems for industrial controls.- Experience in support or maintenance in manufacturing or field sustaining environment.- Experience developing & maintaining Automated Test Systems using LabVIEW/TestStand, Python, MATLAB/Simulink or equivalent tools.- Experience with networking, and wireless computer systems.- Knowledge of state-of-the-art automated test equipment and test fixture design.- Excellent business communication skills.Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

World Wide Tech Deployment (WWTD) is seeking an experienced and business oriented PMO Program Manager to join the Tech Deployment Global Project Management Office (TD PMO) team in driving the success of TD projects through understanding customer/business needs, creating mechanisms and analytics to support, and driving proper levels of reporting and compliance for our teams and leaders IN SUPPORT OF Governance, Risk management and Compliance for Tech Deployment process adherence, tool utilisation and data accuracy. Successful candidates will have Program and Project Management experience in with a focus on process improvement whilst possessing a good understanding of Governance and Compliance processes. Key job responsibilitiesAs a PMO Program Manager, you will be responsible for managing, analysing and reporting compliance of team members for process adherence, tool utilisation and data accuracy. You will be responsible for cross-org leadership communication as well as create status reports, trend risk analysis and governance policies. • Developing governance and compliance processes across multiple teams in line with the organisations needs.• Reporting business risks to senior leadership through trend analysis• Responsible for long term growth opportunities and risk identification, planning, communication and partnering with internal and external teams.• Works independently and in a group-setting, anticipates follow-up questions and responds with supporting data• Excellent communication, both verbal and written as you will be required to write policies, status reports, leadership report-out, update WBR/MBR/QBR documentation.• Working closely with external teams to implement corporate mandate process improvement within the organisationAbout the teamThe TD Global PMO is a centralized team responsible for overseeing and standardizing project management practices across the entire organization on a global level. The team is responsible for end to end business management from global intake, staffing models to project compliance. TD PMO provides guidance, support, and best practices to internal teams to ensure successful delivery of projects that meet business objectives, timelines, and budgets.BASIC QUALIFICATIONS- 3+ years of program or project management experience- 3+ years of defining and implementing process improvement initiatives using data and metrics experience- Knowledge of Excel (Pivot Tables, VLookUps) at an advanced level and SQL- Experience using data and metrics to determine and drive improvements- Experience working cross functionally with tech and non-tech teams ...

Join the team which delivers highly differentiated silicon into Blink and Ring battery powered devices. Our verification team works on state-of-the art SoCs in a vertically integrated team environment to deliver products our customers love. Our verification team is involved in early architectural and micro-architectural trade-offs to reduce time-to-revenue by shortening the DV cycle. Innovators will be delighted with our integrated verification/validation environment that is used to perform architectural modeling to post-silicon validation. The team works backwards from customer requirements to build super-low power, energy efficient designs that include the latest in AI, video processing, low power communications and CMOS fabrication technology. Key job responsibilities- Use and/or build bit accurate C models- Evaluate block and sub-systems for testability/verifiability - Write comprehensive block and system level testplans- Build assertions, traffic generators and scoreboards- Execute testplans and perform rigorous debugBASIC QUALIFICATIONS- Bachelor's degree in Electrical / Computer Engineering or related field- 5+ years experience in digital verification, preferably in image processor, SoC/Interfaces- 3+ years of experience in C/C++ and scripting (Python or TCL)- 5+ years experience in System Verilog or UVM ...

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain — and we’re looking for talented people who want to help.You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.Amazon Web Services’ Network Products Development team is looking for experienced test professionals to help build our next generation networking platforms. The right candidate will play a key role in the design and development of our next generation Ethernet switching platforms for our world class data centers.You will have previous experience testing network products. This includes reviewing designs for testability, developing manufacturing test plans, executing them, troubleshooting issues found during early prototype stages and transition to manufacturing. Compile and analyze production test data using automated data analysis techniques. You should be passionate about the role testing plays in achieving product reliability and quality. Applying skills in developing new test processes, test automation and debug is expected.Prefer that position be based in SF Bay Area but will consider Seattle candidates. Candidate should be able to accommodate up to 10% travel to other AWS sites and Asia.Key job responsibilities* Develop and implement detailed validation plans tailored to specific hardware designs* Collaborate with design and production teams to understand and test against product requirements* Analyze and interpret data from validation tests, offering insights and recommendations* Design and document validation processes, findings, and insights in a structured and clear manner* Component specification study and component validation* Oversee and plan the use of validation equipment to guarantee consistent results* Work cross-functionally to troubleshoot and address any hardware issues identified during validation* Second source qualification, cost down design validation and manufacturing efficiencies* Support new product introduction and Sustaining engineering* Develop and contribute in testing automation A day in the lifeOn an everyday basis as part of our team, you have the unique opportunity to understand the growing AWS network and our internal customers’ requirement on interconnect solutions. You'll work backwards to devise hardware solutions by influencing the broad industry and/or to develop softwaretools with sister teams to maintain a highly available network that delights AWS customers. You design and implement processes and mechanisms that both help the team to deliver business impact to the organization in a systemic way, while also helping to raise the bar on our operational excellence.Operating at the scale we do, there is no blueprint for how to do what we do, which encourages our engineers to identify and develop simple solutions to complex problems. We encourage durable solutions that look around corners while taking into consideration our customer needs from a cost, performance, and reliability perspective. We work closely with our internal partners that design, buildand operate the network to ensure that our solutions meet their needs and exceed their expectations.About the teamWithin AWS Networking the NPD (Network Product Development) organization is responsible for, designing the hardware, building the software, and owning the interconnects for the routers that power the global AWS network. Beyond product delivery we actively manage the fleet or routers in a network that grows by 70% annually. This means tracking key business and operational metrics to ensure that we operate smoothly and minimize or eliminate customer impact due to device related issues for a transparent AWS customer experience.Why AWSAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Diverse ExperiencesAmazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Mentorship and Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.BASIC QUALIFICATIONS- Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering- 5+ years experience of hardware design and validation of components, subsystems and systems- Experience performing PCB schematic and layout reviews to ensure specification compliance- Knowledge of Power and thermal design and validation- Experience performing hardware validation, including high-speed I/O, low-speed I/O, voltage regulator and evaluating results ...